User Manual Q&AAnswer
Apr 12, 2025 - 02:26 AM
To reset your TP-Link PG2400P G.hn2400 Passthrough Powerline Kit, follow these steps:
1. Make sure the powerline adapter is plugged into a wall socket.
2. Locate the Pair button on the powerline adapter. It is usually located on the side or bottom of the device.
3. Press and hold the Pair button for more than 6 seconds until all LEDs on the powerline adapter turn off.
4. Release the Pair button.
5. Wait for the powerline adapter to restart. This may take a few seconds.
6. The powerline adapter has now been reset to its factory default settings.
Note: Resetting the powerline adapter will remove any customized settings and configurations. After the reset, you will need to set up the powerline kit again according to the instructions provided in the user guide.
For more information and troubleshooting tips, refer to the "FAQ (Frequently Asked Questions)" section in the TP-Link PG2400P G.hn2400 Passthrough Powerline Kit User Guide.
Add New Comment