User Manual Q&AAnswer
Apr 12, 2025 - 01:41 AM
To adjust the height of the FELLOWES F8949401 Levado Height Adjustable Desk Base, follow these steps:
1. Initialize the system: Before operating the table, you need to complete the initialization process. Lightly touch the center of the handset and the "M" buttons simultaneously for 10-15 seconds. The legs will begin to move down at a slow speed. Continue to hold the buttons until the legs reach the lowest position, then rebound 2mm to 5mm and stop. Release both buttons at the same time. This completes the initialization procedure.
2. General operation: To move the table up or down, lightly hold your finger on the top or back of the handset until the work surface reaches the desired height. The table will continue to move until you release the button or reach the maximum or minimum height.
3. Memory stop positions: The FELLOWES F8949401 Levado Height Adjustable Desk Base has memory settings that allow you to save specific heights. There are two groups of memory settings, each with two height settings. To set a specific position, raise or lower the table to the desired height, then lightly touch the "M" button for two seconds. The LED display will blink to indicate that the position has been stored. To clear the stored settings, lightly touch the "M" button for 8 seconds until "CLR" displays.
Please refer to the instruction manual for more detailed information and safety instructions.
Add New Comment