User Manual Q&AAnswer
Apr 12, 2025 - 01:20 AM
To connect your turntable to the Mission 778X amplifier, you will need to use the dedicated phono input on the amplifier. Here are the steps to follow:
1. Make sure the Mission 778X amplifier is turned off and unplugged from the power source.
2. Locate the phono output on your turntable. It is usually labeled as "PHONO" or "TURNTABLE."
3. Take an RCA cable and connect one end to the phono output of your turntable.
4. Connect the other end of the RCA cable to the phono input on the rear panel of the Mission 778X amplifier. The phono input is labeled as "PHONO."
5. Ensure that the connections are secure and tight.
6. Plug in the Mission 778X amplifier to the power source and turn it on.
7. Select the phono input on the amplifier either using the xxxx on the front panel or the source select buttons on the remote control.
8. The corresponding LED source indicator will illuminate, indicating that the phono input is selected.
9. You should now be able to play music from your turntable through the Mission 778X amplifier.
Please refer to the user manual for additional information and troubleshooting tips.
Add New Comment