User Manual Q&AAnswer
Apr 12, 2025 - 01:11 AM
To assemble the Proactive 34600 Protekt 600 Stand Sit-To-Stand Patient Lift, follow these steps:
1. Open the box and take the lift out.
2. Unscrew the nuts and bolts at the top and bottom of the mast.
3. Attach the boom to the mast and hand-tighten the bolt and nut.
4. Attach the L-shaped arms to the back of the kneepad. Use the proper holes on the L-shaped arms for the desired height of the kneepad.
5. Attach the kneepad assembly to the mast.
6. Attach the actuator and pendant to the control box.
7. Attach the L-shaped arms to the mast by making adjustments to the desired position and using the bolt to fasten them to the mast.
For more detailed instructions and illustrations, please refer to the Proactive 34600 Protekt 600 Stand Sit-To-Stand Patient Lift User Guide.
Add New Comment