User Manual Q&AAnswer
Apr 12, 2025 - 12:58 AM
To connect the VigilLink VL-IPHDKD-1 1080P AV over IP Decoder to your display device, follow these steps:
1. Locate the HDMI OUT port on the Decoder (Type A, 19-pin female).
2. Connect one end of an HDMI cable to the HDMI OUT port of the Decoder.
3. Connect the other end of the HDMI cable to the HDMI input port of your display device, such as a TV or monitor.
Note: Make sure to use a high-quality HDMI cable for optimal performance.
For more detailed information and illustrations, please refer to the "Decoder Panel" section in the user manual provided with the product.
Add New Comment