User Manual Q&AAnswer
Apr 11, 2025 - 12:25 PM
To install the TCP Smart SMAWHTOWRAIL500W05EW Wifi Towel Radiator, follow these steps:
1. Ensure that the product is suitable for indoor use only and is IP24 rated. Do not submerge the unit underwater or attach it to damp or electrically conductive surfaces.
2. Drill holes on the wall according to the provided wall mounting instructions. Make sure to keep to the distances as shown in the placement instructions.
3. Fit the fasten tube in the hole and attach the bracket on the wall using screws.
4. Carefully hang the unit on the bracket and fix it with the locker and xxxx as shown in the provided picture. Finish by covering the xxxx heads with the cover.
5. Before using the heater, make sure it is mounted tightly on the wall.
Note: If you are unsure about installing the product, it is recommended to consult a qualified electrician.
For more detailed installation instructions, please refer to the TCP Smart SMAWHTOWRAIL500W05EW Wifi Towel Radiator Instruction Manual.
Add New Comment