User Manual Q&AAnswer
Apr 11, 2025 - 12:21 PM
To mount the SOLAX POWER X3 3 Phase Inverter on the wall, follow these steps:
1. Use a marker to mark the drilling holes of the bracket on the wall.
2. Drill holes at the marked spots with a depth of 65 mm.
3. Insert the expansion bolt into the hole and use a rubber hammer to knock the expansion xxxx bolt into the wall.
4. Align the bracket with the xxxx and use an inner hexagonal wrench to xxxx the tapping xxxx until the expansion bolt "bang" is heard.
5. Hang the buckle on the inverter to the corresponding position of the backplane.
6. Use the inner hexagonal wrench to tighten the inner hexagonal xxxx on the right side of the inverter.
Please refer to the SOLAX POWER X3 3 Phase Inverter Installation Guide for more detailed instructions and illustrations.
Add New Comment