User Manual Q&AAnswer
Apr 11, 2025 - 11:57 AM
To calibrate and start using the Metal Water Finder TF-MiNi Compact and Mini Metal Detector, follow these steps:
1. Press the power button on the front of the main unit for two seconds to turn on the device. You will hear a welcome tone, indicating that the device is in operating mode.
2. Press the power button once to start the automatic calibration process and initiate the search.
3. Direct the search antenna towards the area you want to search and slowly move the device during the search.
4. When the device detects the presence of a hidden target, it will gradually emit alert sounds and light indicators that increase in intensity as you get closer to the target.
5. Once you have finished the search process, you can turn off the device by long-pressing the power button. You will hear a tone indicating that the device has been switched off.
Note: The strength of the ionic charges of the target depends on the type of metal and the period of its existence underground. You can determine the approximate depth of the target by identifying and marking the target point, then measuring the distance from that point to the target.
Please refer to the user manual for more detailed instructions and information on using the Metal Water Finder TF-MiNi Compact and Mini Metal Detector.
Add New Comment