User Manual Q&AAnswer
Apr 11, 2025 - 11:51 AM
To connect the SoClean PNA1604-23-EU CPAP Cleaner and Sanitizer adapter to your CPAP hose, please follow the installation instructions provided in the manual. Here is a step-by-step guide:
1. If you are a SoClean 3 user, you can skip this step. If you are a SoClean 2 user, remove the hose from your sleep equipment.
2. Install the Adapter onto the SoClean hose.
3. Connect the Ozone Tube to the SoClean Adapter. Ensure that the Ozone Tube is connected to the back of the SoClean unit as well.
4. Place your CPAP mask into the SoClean Chamber.
5. Run the maintenance cycle as instructed in the User Manual provided with the device.
Please note that it is important for the adapter to fit snugly. If the fit appears too tight, do not force the adapter into the tubing. If the adapter is loose, contact Customer Care for assistance.
For further information and detailed instructions on using the SoClean PNA1604-23-EU CPAP Cleaner and Sanitizer, please refer to the User Manual provided with the device. An electronic version of the User Manual is available at SoClean.com, or you can contact Customer Care for assistance.
If you have any additional questions or need further support, you can reach out to SoClean Customer Care at 00800 5558 8811 or email them at info@soclean.com.
Add New Comment