User Manual Q&AAnswer
Apr 11, 2025 - 11:37 AM
To assemble the COUGAR FORTE Microphone Arm, you will need a cross screwdriver and power drill (not included in the package). Here are the steps for both the clip type and hole type installation options:
Clip Type Installation:
1. Attach the clip to the microphone arm by aligning the holes and securing them with screws.
2. Place the microphone arm on the edge of your desk and tighten the clip to secure it in place.
3. Adjust the height and position of the arm using the ergonomic knobs.
Hole Type Installation:
1. Use a power drill to create a hole in your desk according to the provided dimensions in the assembly drawing.
2. Insert the microphone arm into the hole and secure it with the included screws.
3. Adjust the height and position of the arm using the ergonomic knobs.
Please refer to the assembly drawing in the manual for more detailed instructions and illustrations.
Note: Ensure that the supported microphone weight does not exceed 950g and the desk thickness does not exceed 60mm.
For any further assistance or clarification, you can contact COUGAR USA Technical Service at (833) 256-3778 or through their service email provided in the manual.
Add New Comment