User Manual Q&AAnswer
Apr 11, 2025 - 11:34 AM
To install the battery in the TESLA TSL-SWI-SCENEZG4 Smart Switch Quatro/Dual Battery, please follow these steps:
1. Push the front panel of the switch to the left to open it.
2. Remove the old battery, if present.
3. Insert a new CR2430 3V DC battery into the battery slot.
4. Close the front panel.
After replacing the battery, the smart scene switch will automatically connect to the ZigBee network and resume normal working status, without requiring any additional app settings.
For more detailed instructions and illustrations, please refer to the "Install/Replace Battery" section in the user guide.
Add New Comment