User Manual Q&AAnswer
Apr 11, 2025 - 11:31 AM
To install the TESLA 047-1406 Smart Sensor Smoke, follow these steps:
1. Choose an installation method: You can either use screws or a 3M sticker to mount the product.
2. Installation checking: Ensure that the product is installed properly. Check if the semicircle on the product is aligned with the line on the mounting base to form an arrow. If they align to form a circle, the product is installed properly.
3. Precautions: Keep in mind the following precautions while installing the product:
- Mount the product only on indoor ceilings.
- Install the product at least 50 cm away from lighting products.
- Do not install the product in bathrooms or other moist environments.
- Do not install the product in places with non-fire smoke or steam.
- Ensure that the temperature of the installation environment is within the range of -10°C to +55°C.
- If a cupboard is near the ceiling, install the product at least 60 cm away from the cupboard.
- Install the product at least 150 cm away from ventilators, air conditioners, and air vents.
- You are advised to use screws to install the product. If you use a 3M sticker, any product damage or safety accidents incurred therefrom will be your responsibility.
- If you choose to use a 3M sticker, affix the product to a smooth, even, dry, and clean surface.
- Regularly check whether the product is attached to the surface securely to prevent it from falling down.
- The product cannot be mounted to the mounting base unless the battery is installed.
- If you affix the product to a painted surface, peeling of the paint may cause the product to fall down. If this occurs, you are liable for any problems incurred therefrom.
Please refer to the TESLA 047-1406 Smart Sensor Smoke User Manual for further details and illustrations on the installation process.
Add New Comment