User Manual Q&AAnswer
Apr 11, 2025 - 11:23 AM
To set up RAID on your ASRock motherboard, you will need to follow these steps:
1. Enter the UEFI setup utility by pressing [F2] or [Del] key while the system is booting.
2. Go to Advanced\Storage Configuration.
3. Set "SATA Mode" to .
4. Go to Advanced\AMD PBS\AMD Common Platform Module and set "NVMe RAID mode" to .
5. Press [F10] to save your changes and exit, and then enter the UEFI setup again.
6. After saving the changes and rebooting the system, the "RAIDXpert2 Configuration Utility" submenu will become available.
7. Go to Advanced\RAIDXpert2 Configuration Utility\Array Management and delete any existing disk arrays before creating a new array.
8. Go to Advanced\RAIDXpert2 Configuration Utility\Array Management\Create Array.
9. Select the desired RAID level (e.g., RAID 0, RAID 1, RAID 5, RAID 10).
10. Select the physical disks you want to use in the array.
11. Apply the changes and create the array.
12. Press [F10] to save and exit.
Please note that the exact steps and options may vary depending on your specific ASRock motherboard model. It is recommended to refer to the product specification page and the user manual for your motherboard for detailed instructions.
Add New Comment