User Manual Q&AAnswer
Apr 11, 2025 - 11:18 AM
To increase the tension in the spring mechanism of the Select Blinds Cordless Roller Shades with Cassette, follow these steps:
1. Take the shade down from the brackets.
2. Locate the tension xxxx at one end of the shade.
3. Using a screwdriver, turn the xxxx in the direction of the front of the shade. This will increase the tension in the spring.
4. Make small adjustments, around 2 turns at a time, to avoid over-tensioning the spring mechanism.
5. Once you have adjusted the tension, reattach the shade to the brackets by following the installation instructions provided in the manual.
Note: It is important to remove the shade from the brackets before adjusting the tension. Also, be careful not to over-tension the spring mechanism, as it may cause damage to the shade.
Add New Comment