User Manual Q&AAnswer
Apr 11, 2025 - 10:59 AM
To connect the SINGCALL Tuya Wifi Smart Wireless Pager Calling System in AP mode, follow these steps:
1. Locate the "RESET" button on the back of the call button. Use a card pick-up pin or a small pointed object to press and hold the "RESET" button.
2. While holding the "RESET" button, simultaneously press and hold the button on the call button itself. Make sure to keep both buttons pressed until the call button's light starts blinking slowly.
3. On your smartphone or tablet, go to the Wi-Fi settings and search for available networks.
4. Look for a network named "SmarLife-XXXX" (XXXX represents a unique identifier). This network does not require a password.
5. Connect your device to the "SmarLife-XXXX" network.
6. Once connected, open the Tuya Smart or Smart Life app on your device.
7. Follow the app's instructions to add a new device. Select the appropriate device type (pager calling system) and proceed with the setup process.
8. The app will prompt you to connect the device to your home Wi-Fi network. Select your network from the list and enter the password, if required.
9. Wait for the app to complete the setup process. It will establish a connection between the pager calling system and your home Wi-Fi network.
10. Once the setup is complete, you can use the app to control and manage the SINGCALL Tuya Wifi Smart Wireless Pager Calling System.
Please note that these instructions are based on the information provided in the manual. If you encounter any difficulties or have specific questions, referring to the product manual or contacting the manufacturer's customer support would be advisable.
Add New Comment