User Manual Q&AAnswer
Apr 11, 2025 - 10:52 AM
To install the ENCELIUM DALI LS PD CI Suspended Ceiling Integration, follow these steps:
1. Cut a Ø 68 mm (2.7 inches) hole in the ceiling.
2. Connect the sensor cable to the DALI Line.
3. The DALI LS PD CI is supplied from DALI Voltage as per DALI standard EN 62386. Power consumption is approximately 6 mA.
4. Position the mounting brackets up and push the DALI LS PD CI through the hole.
5. The mounting brackets will snap down onto the ceiling tile, securing the DALI LS PD CI into place.
Note: If you are wiring multiple DALI LS PD CIs, refer to the instructions on how to connect them to the Wired Manager — DALI.
For more detailed information and illustrations, please refer to the ENCELIUM DALI LS PD CI Suspended Ceiling Integration Installation Instructions provided in the product manual.
Please ensure that you read and follow all safety precautions and guidelines mentioned in the manual before installing the product.
Add New Comment