User Manual Q&AAnswer
Apr 11, 2025 - 10:38 AM
To connect the HERTZ HMR BT Waterproof Bluetooth Receiver to your device, follow these steps:
1. Make sure the unit is turned off.
2. Start the engine before using the unit.
3. Be careful about using the unit for a long time without running the engine, as it may drain the vessel battery.
4. Ensure that the negative ground 12/24 V power supply is connected.
5. Disconnect the battery's "-" terminal before starting the installation to prevent short circuits.
6. Install the unit away from the engine compartment to avoid interference.
7. Use authorized parts for installation to prevent damage to the unit.
8. Double-check wire connections before turning on the unit.
9. Consult with a dealer for proper installation or additional accessories if needed.
10. Avoid installing the unit in areas with excessive moisture, dust, dirt, vibration, high temperatures, or where it may interfere with vessel operation or cause injury during sudden stops.
11. Dispose of the product properly by contacting your local municipal office for recycling and disposal information.
12. Keep the volume at a level where external sounds can be heard for safety while boating.
For more detailed instructions and information, please refer to the HERTZ HMR BT Waterproof Bluetooth Receiver User Guide provided with the product.
Add New Comment