User Manual Q&AAnswer
Apr 11, 2025 - 10:12 AM
According to the user manual, here are the steps to properly clean and maintain the Super Vac 718-E2 Ventilation Fan:
1. Disconnect the ventilator from the power source before performing any maintenance or repair.
2. Inspect the ventilator for any build-up of material or dirt on the blade and inside housing. Excessive build-up can cause imbalance, accelerated wear on motor bearings, and vibration.
3. Remove the ventilator guards to access the blade and housing.
4. Clean the blade and inside housing with mild detergent and water. Do not use abrasives, sharp instruments, or caustic solvents that may scratch or damage the aluminum alloy blade.
5. Inspect the inlet and outlet guards for damage or missing pieces. Replace any damaged or missing guards before operating the ventilator.
6. When replacing the guards after cleaning, position them with the rings to the outside with the row of spot welds holding the rings on the bottom.
7. Ensure all threaded fasteners are properly tightened.
8. The motor is of heavy-duty ball bearing construction and requires no lubrication for the life of the motor.
9. Regularly inspect the power cord plug for sound connections to the ground fault interrupter circuit.
10. If any maintenance or repair is beyond your expertise, it is recommended to have it performed by experienced and trained personnel.
Please refer to the user manual for any additional information or specific instructions related to cleaning and maintenance of the .
Add New Comment