User Manual Q&AAnswer
Apr 11, 2025 - 09:24 AM
To determine the correct Netatmo adaptor for your radiator valve, follow these steps:
1. Remove the existing thermostatic valve from your radiator to access the valve body.
2. Check if your valve body has threads or clips.
- If your valve body has threads, proceed to Section B of the user guide.
- If your valve body has clips, turn the document and go to Section C.
3. Determine the diameter of your valve body by using the template provided. If the valve body passes through the template, the diameter is M28. If not, the diameter is M30.
4. Test both sides of the template to determine if your valve body threads are 1 or 1.5mm.
5. Choose your Netatmo adaptor based on the diameter of the valve body and size of threads determined in the previous steps.
- If you have selected an M28 x 1.5 adaptor and cannot xxxx the Netatmo Smart Radiator Valve onto the adaptor, you may have a Pettinaroli valve. In this case, you will need to order a specific adaptor online at www.netatmo.com/adaptor.
6. Keep the motor cap included in the packaging, as the Netatmo Energy App may require its use.
7. If your valve body has clips and none of the clip adaptors provided fit, you can order additional adaptors online at www.netatmo.com/adaptor.
8. For further compatibility information, you can check your radiator compatibility on check.netatmo.com.
Please note that the above information is a summary of the user guide. For more detailed instructions and illustrations, refer to the Netatmo Valve Adaptor Pack User Guide provided with the product.
Add New Comment