User Manual Q&AAnswer
Apr 11, 2025 - 09:08 AM
To properly put on the Swim Essentials Swimming Armbands, please follow these steps:
1. Before each use, check the general condition of the armbands and test for leaks.
2. Ensure that the armbands are in undamaged condition.
3. Place the deflated armband on the upper arm, with the flattened side facing downwards (next to the inside of the armpit).
4. Inflate both air chambers of the armband. Make sure it is inflated in a way that it cannot slide down the upper arm but is not too tight either.
5. Repeat the process for the second armband.
To inflate the armbands:
1. Open and pinch the valve.
2. Blow air into the armbands by mouth until the air chambers are fully inflated. Do not use a compressor.
3. Close the valves when the air chambers are fully inflated and press them in.
To deflate the armbands:
1. Pull the valve out and pinch it so that the air can escape.
Remember to always fully inflate all air chambers and wear all components of the armbands. The armbands should be worn on the upper arms only. Do not allow children to bite or chew the product as it may pose a choking hazard. Also, please note that the Swim Essentials Swimming Armbands are not an aquatic toy.
For more detailed instructions and safety information, please refer to the provided user manual and follow the guidelines carefully.
Add New Comment