User Manual Q&AAnswer
Apr 11, 2025 - 09:05 AM
To clean and maintain the dalap SKT ALU Aluminium Radialventilator, follow these steps:
1. Turn off the fan and disconnect it from the power supply.
2. Take down the fan from its place of installation.
3. Use a dry fine brush or cloth to remove all dust from the fan's grille.
4. Inspect the fan regularly and replace broken or worn cables, nuts, and other components without delay.
5. Reassemble the fan and reconnect it to the duct and power supply.
It is recommended to clean the fan every 6 months or more often if necessary, as insufficient maintenance may result in a decrease in the service life of the device or serious failure. However, maintenance should only be done by a qualified person.
CAUTION: The motor should not come into contact with water or cleaning agents during cleaning. Do not use flammable or explosive cleaning agents.
For more information and detailed instructions, please refer to the dalap SKT ALU Aluminium Radialventilator User Manual.
Add New Comment