User Manual Q&AAnswer
Apr 11, 2025 - 08:59 AM
To properly install and use the BLACK LION AUDIO PG-P Type 1 Portable Power Conditioner and Surge Protector, follow these steps:
1. Read the owner's manual carefully and familiarize yourself with the important safety instructions provided.
2. Ensure that you have a three-prong AC cable that properly fits the power source. Using the correct fuse designated on the rear panel before plugging in the power cord is crucial to prevent damage to the unit.
3. Find an appropriate location for the PG-P Type 1 and plug it into a grounded 230VAC outlet. If you are unsure about the power source, consult with your local power company.
4. Plug your equipment into the PG-P Type 1's filtered outlets. These outlets employ power filtering to provide clean power to your components.
5. Turn on the power by switching the POWER switch to the ON position. This will power the components plugged into all outlets.
6. Check the GROUND OK LED. If it is on, it means that the PG-P Type 1 is properly grounded. If the LED is not on, unplug the unit from the power source and correct the fault.
7. Verify that the Protection ON LED is on. This indicates that the PG-P Type 1's power surge circuitry is functioning correctly. If this LED is off, the circuit may have malfunctioned, and you should unplug the unit immediately.
8. Look for the Clean Power On LED. When this LED is on, it means that the PG-P Type 1 is providing clean, high-quality AC power to all connected components.
9. The PG-P Type 1 comes with an ultra-high current AC power cable, which is designed to maximize power transfer to high-current components like amplifiers.
For more detailed information and specifications, refer to the owner's manual provided by BLACK LION AUDIO. If you encounter any issues or have further questions, it is recommended to contact the Black Lion Audio distributor in your country or the dealer from whom you purchased the product for assistance.
Add New Comment