User Manual Q&AAnswer
Apr 11, 2025 - 08:55 AM
To connect the Rockville RWM120X wireless microphone system, follow these steps:
1. Place the receiver in a stable location, at least 3 feet off the ground for optimal transmission.
2. Connect the included antenna to the antenna port on the back of the receiver.
3. Connect the audio out of the receiver to your sound system using a 1/4" TRS cable.
4. Plug in the power supply provided to the power plug on the back of the receiver.
5. Extend the antenna vertically for better reception.
6. Switch on the receiver.
7. While the receiver is in standby mode, switch on the microphones.
8. Adjust the volume on the receiver as necessary.
9. Use the trim adjustment on the body pack (if applicable) to fine-tune the microphone gain.
Remember to avoid operating the microphones in close proximity to or in front of speakers to minimize feedback.
For further assistance, you can refer to the Rockville RWM120X Series High Performance Wireless Microphone System Owner's Manual or contact Rockville's technical help line at 1-646-758-0144.
Add New Comment