User Manual Q&AAnswer
Apr 11, 2025 - 06:55 AM
For Intel Installation:
1. Insert the position screws into the corresponding holes of the Intel brackets.
2. Secure the Intel brackets to the cooler using the bracket screws.
3. Apply thermal paste on the CPU and remove the protection film.
4. Align the CPU cooler mounting holes of the motherboard with the positioning screws.
5. Tighten the nut with a hex socket.
6. Connect the fan cable to the CPU_FAN socket on the motherboard.
For AMD Installation:
1. Insert the position screws into the corresponding holes of the AMO brackets and fix them with nuts.
2. Secure the AMD brackets to the cooler using the bracket screws.
3. Remove the plastic retainers of the AMO retention module.
4. Remove the protection film.
5. Apply thermal paste on the CPU.
6. Align the CPU cooler mounting holes of the motherboard with the positioning screws.
7. Tighten the nut with a hex socket.
8. Connect the fan cable to the CPU_FAN socket on the motherboard.
Please note that these instructions are a summary and it is important to refer to the JONSBO HX6200D CPU Cooler User Manual for detailed installation steps and illustrations.
Add New Comment