User Manual Q&AAnswer
Apr 11, 2025 - 06:51 AM
To install the KOHLER K-84325 Kingston Ultra Top Spud Flushometer Bowl, please follow the installation instructions provided in the manual. Here is a step-by-step guide:
1. Start by preparing the wall for installation. Ensure that the waste outlet is properly aligned and the wall is sturdy enough to support the flushometer bowl.
2. Install the flushometer valve according to the manufacturer's instructions and local codes. Ensure that the valve is braced properly and the pressure and flow are correct.
3. Attach the top spud to the flushometer valve. The KOHLER K-84325 Kingston Ultra Top Spud Flushometer Bowl requires a 1-1/2" (38 mm) top spud.
4. Place the flushometer bowl onto the wall, aligning it with the top spud. Make sure the bowl is level and secure.
5. Connect the water supply to the flushometer valve. Follow the instructions provided with the valve for proper connection.
6. Test the flushometer bowl for proper functionality. Check for any leaks and ensure that the flush performance is satisfactory.
Please note that it is important to refer to the manufacturer's instructions and local codes for specific requirements and regulations regarding flushometer installations. If you have any further questions or concerns, it is recommended to contact KOHLER customer support at 1-800-4KOHLER (1-800-456-4537) for assistance.
Add New Comment