User Manual Q&AAnswer
Apr 11, 2025 - 06:39 AM
To assemble the BOWER BWRWAMOD4RGB RGB Quad Modular Light Kit, follow these steps:
1. Tripod Setup:
- Unscrew the locking xxxx in a counter-clockwise direction until it is loose.
- Pull the legs outward and set the leg stance according to your preference.
- Once the leg stance is determined, tighten the locking xxxx in a clockwise direction to secure the stance.
- Unlock the tripod head and turn it to the unlocked position.
- Pull out the extensions from the center column as needed for the desired height.
- Make sure to turn each column extension to the locked position (clockwise) to secure the height.
2. Modular Light Installation:
- The Modular Quad Light is designed to form various shapes and forms.
- Pull apart the outer light sections to begin forming a shape.
- Use the Secure Connector to attach the Quad Light sections together.
- xxxx the 360° Ballhead into one of the 1/4 in. threads located on the edges of the light.
- xxxx the Quad Light with the attached 360° Ballhead to the tripod using the xxxx -in dial on the tripod head.
- Attach the Phone Clip with Flexible Pivot Mount by screwing it into a 1/4 in. thread.
- Open the Phone Clip and insert your smartphone. The clip can accommodate phones up to 3.6 inches.
- Connect the USB cable on the Quad Light to a USB port on a computer, laptop, wall charger, power bank, etc.
3. Using the In-Line Remote Control:
- The kit includes an in-line remote control for easy operation.
- Remove the clear battery discharge film before using the wireless remote.
- The wireless remote comes pre-installed with a battery.
- The remote allows you to control the lighting modes and effects.
- Press the RGB button repeatedly to cycle through the nine different colors and 16 special effects.
- Adjust the brightness using the remote control.
Please refer to the provided user manual for more detailed instructions and safety precautions.
Add New Comment