User Manual Q&AAnswer
Apr 11, 2025 - 06:26 AM
To measure the width of each window for a corner window installation, follow these steps:
1. Measure the width of each window from the corner of the walls to the point where you would like the blind or shade to cover.
2. Use a steel tape measure to ensure accurate measurements.
3. Round the measurements to the nearest 1/8".
4. Record the measurements for each window, clearly indicating the width.
5. If the corner is not a 90° angle, you will need to measure the angle using a protractor or angle finder. Alternatively, you can use two business cards as templates to measure the angle (refer to the instructions on page 2 of the user guide).
6. If the angle measurement is not 90°, make sure to indicate the angle measurement when ordering the blinds or shades.
7. The manufacturer will take appropriate deductions for a proper fit based on the measurements provided.
Please note that depending on the angle of the corner, some corner blinds may not be able to be raised to the same height. Additionally, horizontal slat alignment between blinds cannot be guaranteed.
Add New Comment