User Manual Q&AAnswer
Apr 11, 2025 - 05:29 AM
To set the time and date on the SKMEI 1265 LED Watch, follow these steps:
1. In Standby Mode (blank screen), press the S1 button to show the current time.
2. Press and hold the S1 button for 3 seconds to enter Time Setting Mode. The hour will start flashing.
3. Press the S1 button again to adjust the hour. Keep pressing until you reach the desired hour.
4. After adjusting the hour, hold the S1 button for 3 seconds to make the minute start flashing.
5. Press the S1 button again to adjust the minute. Keep pressing until you reach the desired minute.
6. Repeat the above steps to adjust the year, month, and day. Each time you hold the S1 button for 3 seconds, the respective value will start flashing, and you can adjust it by pressing the S1 button.
7. If there is no operation for 5 seconds, the watch will automatically go back to Standby Mode.
Please refer to the SKMEI 1265 LED Watch user manual for more detailed instructions and illustrations.
Add New Comment