User Manual Q&AAnswer
Apr 11, 2025 - 05:00 AM
To set the time and date on the SKME 1543 Dual Time Watch, follow these steps:
1. In normal mode (standby mode), press the S2 button for 2 seconds to enter the time and date mode. The "Hour" will start flashing.
2. Press the S1 button to adjust the hour. Keep pressing the S1 button until you reach the desired hour.
3. Press the S2 button again, and the "Minutes" will start flashing. Press the S1 button to adjust the minutes.
4. Press the S2 button again, and the "Year" will start flashing. Press the S1 button to adjust the year. Note that the watch can display years from 2000 to 2099. For example, "Y 00" represents the year 2000.
5. Press the S2 button again, and the "Month" will start flashing. Press the S1 button to adjust the month.
6. Press the S2 button again, and the "Date" will start flashing. Press the S1 button to adjust the date.
7. After setting all the data, press the S2 button to exit the time and date mode. Alternatively, if there is no operation for 5 seconds, the watch will automatically go back to standby mode.
Please refer to the SKME 1543 Dual Time Watch user manual for more detailed instructions and additional functions.
Add New Comment