User Manual Q&AAnswer
Apr 11, 2025 - 04:38 AM
To set the time and date on the SKMEI 1134 digital watch, please follow these steps:
1. In normal mode, press the B button three times to enter the setting mode. The "Seconds" will start flashing.
2. Press the D button to reset the seconds to zero.
3. Press the C button, and the "Hours" will start flashing. Press the D button to adjust the hours. Pay attention to the AM/PM indicator. If "H" appears, it means the watch is set to the 24-hour format. If "A/P" or "AM/PM" appears, it means the watch is set to the 12-hour format.
4. Press the C button again, and the "Minutes" will start flashing. Press the D button to adjust the minutes.
5. Press the C button again, and the "Month" will start flashing. Press the D button to adjust the month.
6. Press the C button again, and the "Date" will start flashing. Press the D button to adjust the date.
7. Press the C button again, and the "Week" will start flashing. Press the D button to adjust the day of the week.
8. Press the B button to exit the setting mode.
Note: Make sure to follow the correct sequence of pressing the buttons and wait for each setting to stop flashing before moving on to the next one.
Add New Comment