User Manual Q&AAnswer
Apr 11, 2025 - 03:28 AM
To connect the gas cylinder to the H Koenig PLX1022 Gas Plancha 2 Burners, please follow these steps:
1. Ensure that the control valve on the plancha is turned off.
2. Connect the regulator to the gas hose.
3. Connect the regulator to the cylinder valve following the instructions provided with the regulator.
4. Turn on the gas supply at the cylinder or regulator switch, following the regulator connection and operating instructions.
5. Check the connections for any leaks by brushing a soapy water solution onto the hose and all joints. If bubbles appear, there is a leak that needs to be rectified before using the plancha. Consult your gas or plancha supplier for advice.
6. Once the connections are secure and there are no leaks, you can proceed to light the plancha following the lighting instructions in the manual.
Please note that it is important to use the correct regulator and hose approved for LPG at the specified pressures mentioned in the manual. Always check for leaks using a soapy water solution and never use a naked flame for leak detection.
Add New Comment