How do I clean and sterilize the FISHER PAYKEL Auto Clavable Water Trap? (FISHER PAYKEL Auto Clavable Water Trap Instructions Manual)

Answer

manuals.plus

Apr 10, 2025 - 11:55 AM


To clean and sterilize the FISHER PAYKEL 900MR139 Auto Clavable Water Trap, please follow the reprocessing instructions provided in the manual. Here is a summary of the steps:

1. Disconnect the water trap from both the power and gas source before cleaning.
2. Clean the water trap prior to use and whenever it is visibly soiled.
3. Follow the reprocessing instructions (UI-623716) provided by Fisher & Paykel Healthcare. These instructions can be found at www.fphcare.com/fp-reusables.
4. Alternative cleaning methods may deteriorate or damage the product, so it is important to follow the recommended reprocessing instructions.
5. It is recommended to start the reprocessing process as soon as possible after use to prevent gross contaminants from drying on the product.
6. After reprocessing, store the water trap in a clean plastic bag or container, away from direct sunlight or heat, if it is not being reused immediately.
7. The water trap should be discarded after 50 reprocessing cycles or five years from the date of manufacture, whichever occurs earlier.

Please note that the cleaning and sterilization process is crucial to prevent cross-infection between patients and ensure the safety and effectiveness of the water trap. It is important to follow the instructions provided by Fisher & Paykel Healthcare to maintain the product's performance and safety standards.