User Manual Q&AAnswer
Apr 10, 2025 - 11:53 AM
To adjust the detection area and hold-time for the Lit By Cardi LUQUE02 Queen Hub 3CCT Det 105W IP54, you can use the DIP switches on the luminaire. Here are the steps:
1. Locate the DIP switches on the luminaire. These switches are used to adjust the settings for specific applications.
2. To adjust the detection area, refer to the instruction manual for the specific combinations of DIP switch settings. Each combination will correspond to a different detection coverage. Choose the combination that suits your needs and set the DIP switches accordingly.
3. To adjust the hold-time, refer to the instruction manual for the available options. The hold-time refers to the duration the light will remain ON after the last detection. Set the DIP switches according to your desired hold-time.
4. If you want to prioritize the daylight sensor over the motion sensor, you can set the daylight threshold. This threshold determines when the daylight sensor will activate the light. If you prefer the motion sensor to work independently without considering daylight, you can disable the daylight threshold.
Please note that the factory default settings for the Lit By Cardi LUQUE02 Queen Hub 3CCT Det 105W IP54 are a detection area of 100%, a hold-time of 5 seconds, and the daylight threshold disabled. You can refer to the instruction manual for more detailed information on adjusting these settings.
Remember to ensure that the main electrical supply is switched off before installing or making any adjustments to the luminaire. If you have any further questions or concerns, it is recommended to contact the manufacturer or their authorized service agent for assistance.
Add New Comment