How do I connect the Pioneer DJ DM-40D Active Monitor Speakers to my audio devices? (Pioneer DJ DM-40D Active MONITOR SPEAKER Instruction Manual)

Answer

manuals.plus

Apr 10, 2025 - 11:36 AM


To connect the  to your audio devices, follow these steps:

1. Disconnect the power cord before making or changing connections.
2. Read the instruction manuals for the devices you are going to connect with the speakers.
3. Connect the power cord after all the connections are complete. Use the supplied power cord.
4. The input signals to the RCA and STEREO MINI input terminals are mixed, so please beware of the volume level.

Connecting cords:
1. Connect the supplied speaker cord to the speakers.
   - Strip about 1 cm of the head of the supplied speaker cord and twist and remove the exposed insulator. After removing the insulator, thoroughly twist the core wires.
   - Connect the supplied speaker cord to the speaker terminals on the LEFT and RIGHT sides.
   - Insert the core wires into the terminals while pressing the claw on the speaker terminal. Connect the speaker cord with the red line into the + terminal side (red) and the speaker cord without the red line into the - terminal side (black).

Note: After connecting to the terminals, lightly pull the speaker cord to make sure that the heads of the speaker cord are securely connected to the terminals. A loose connection might cause audio output to be interrupted or noise to be output.

If you have any further questions or encounter any issues, please refer to the "Precautions for Use" section in the manual or consult an authorized service company or your dealer.