User Manual Q&AAnswer
Apr 10, 2025 - 08:38 AM
To install the MONDOLUX ANGLO-EU-PLUG 2 Pin Flex and Plug, please follow the steps below:
1. Unscrew the latches on the base side of the remote controller.
- Locate the latches on the base side of the remote controller.
- Use a screwdriver or similar tool to unscrew the latches in a counterclockwise direction.
2. Disconnect the existing flex cable from the controller.
- Identify the existing flex cable connected to the controller.
- Carefully detach the flex cable from the controller by gently pulling it out.
3. Insert 2 wires into each socket on the primary side of the controller.
- Prepare the 2 wires that you will be connecting to the controller.
- Identify the sockets on the primary side of the controller.
- Insert one wire into each socket, ensuring a secure connection.
4. xxxx the latches back onto the controller.
- Place the latches back onto the base side of the remote controller.
- Use a screwdriver or similar tool to xxxx the latches in a clockwise direction until they are tightly secured.
5. Installation is complete.
- Once the latches are securely tightened, the installation of the MONDOLUX ANGLO-EU-PLUG 2 Pin Flex and Plug is complete.
Add New Comment