User Manual Q&AAnswer
Apr 10, 2025 - 08:33 AM
To insert and remove the Micro-SIM card in the TELTONIKA GH5200 GNSS GSM Autonomous Tracker Bluetooth, please follow these steps:
1. Turn off the device before performing any card insertion or removal to avoid damaging the Micro-SIM card or the device's detection capability.
2. Remove the cover of the device by unscrewing the xxxx .
3. Locate the Micro-SIM card slot inside the device.
4. Insert the Micro-SIM card into the slot, ensuring that the cut-off corner of the card is pointing forward towards the slot.
5. Make sure the PIN request for the Micro-SIM card is disabled.
6. Once the card is inserted, reattach the cover and tighten the xxxx .
Note: It is important to handle the Micro-SIM card with care and avoid bending or damaging it during the insertion or removal process.
For more detailed instructions and illustrations, please refer to the "Preparing GH5200 for use" section in the TELTONIKA GH5200 GNSS GSM Autonomous Tracker Bluetooth User Guide.
Add New Comment