How do I install the Belling CHIM903GSS Cooker Hood? (belling Cooker Hood User Manual)

Answer

manuals.plus

Apr 10, 2025 - 08:30 AM

To install the Belling CHIM903GSS Cooker Hood, follow these steps:

1. Assembly and electrical connections must be carried out by specialized personnel.
2. Wear protective gloves before proceeding with the installation.
3. Ensure that the power supply voltage and power correspond to the network and that the socket is suitable. If in doubt, consult a qualified electrician.
4. If the power supply cable is damaged, it must be replaced with a new one obtained from the manufacturer.
5. Connect the cooker hood to the supply network through either a plug fused 3A or hardwired to a 2 phase spur protected by a 3A fuse.
6. Before proceeding with the assembly, remove the anti-grease filter(s) for easier handling.
7. If installing the appliance in the suction version, prepare the hole for air evacuation.
8. Use an air exhaust tube with the same diameter as the air exhaust outlet hole. Using a smaller diameter pipe may reduce efficiency and increase noise.
9. If your appliance is designed for use in habitations with a centralized suction device, follow the instructions provided for connecting to the device.
10. Fix the appliance to the wall using suitable screws and xxxx anchors. Ensure it is aligned with the wall units.
11. Fix the decorative telescopic flue by arranging the electrical power supply within the dimensions of the flue. Fix the support bracket to the ceiling and connect the flange to the air exhaust hole using a connection pipe.
12. Insert the upper flue into the lower flue and rest it above the frame. Extract the upper flue up to the bracket and fix it with a xxxx .
13. If you want to transform the hood from a ducting version to a filtering version, ask your dealer for charcoal filters and follow the installation instructions.
14. For the filtering version, install the hood and flues as described above. Assemble the filtering flue according to the instructions in the kit.

Please note that these are general installation instructions. For specific details and diagrams, refer to the user manual provided with the Belling CHIM903GSS Cooker Hood.