User Manual Q&AAnswer
Apr 10, 2025 - 08:06 AM
To install the CHICAGO FAUCETS 985-AGN2BVBE7CP Remote Spouts, please follow these steps:
1. Ensure that you are familiar with and comply with local plumbing codes.
2. Before installation, flush all pipes thoroughly to remove any debris.
3. Position the faucet in the desired location on the deck.
4. Connect the faucet to the water supply using a 3/8" NPT female thread inlet.
5. Tighten the connections securely, but avoid over-tightening.
6. After installation, remove the spout outlet or flow control.
7. Flush the faucet thoroughly to clear any debris that may have entered during installation.
8. Replace the spout outlet or flow control.
9. Carefully clean the product using mild soap and warm water. Avoid using abrasive cleaners, chemicals, or solvents as they can damage the surface.
10. For specific operation and maintenance instructions, refer to the installation instructions and repair parts documents available at www.chicagofaucets.com.
If you encounter any difficulties during the installation process or have further questions, you can contact Chicago Faucets at 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.
Add New Comment