User Manual Q&AAnswer
Apr 10, 2025 - 07:29 AM
To connect the ATEMPOWER AP300MS-B 300W Solar Blanket to your battery, follow these steps:
1. Connect the Alligator Clips to the battery.
2. Connect the controller to the battery with Anderson plugs. Use the extension cable if needed.
3. Connect the solar blanket to the controller with Anderson plugs.
Note: When uninstalling, you are required to repeat the steps from last to first.
It is important to ensure that the connectors are clean before use and that the solar blanket and controller are kept clean. Also, make sure to keep the solar panel, MPPT controller, and battery away from liquids and chemical solvents.
For more detailed information and illustrations, please refer to the user manual provided with the ATEMPOWER AP300MS-B 300W Solar Blanket.
Add New Comment