User Manual Q&AAnswer
Apr 10, 2025 - 07:21 AM
To pair the dimming module (PPA401S) with the dimmer switch (WP4013), follow these steps:
1. Ensure that the dimming module is powered on.
2. Press the PAIR button on the dimming module. The LED on the module will flash quickly.
3. Hold the ON/OFF button on the remote of the dimmer switch for 3 seconds.
4. An audible beep will indicate that the remote has been paired with the dimming module.
5. Test the remote to confirm successful pairing.
Note: The up/down buttons on the remote respond to individual presses and will not make continual adjustments if held down. Once pairing is complete, slide the remote into the wall plate.
For more detailed instructions and information, please refer to the user manual provided by superbrightleds.com.
Add New Comment