How do I replace the faceplate on the Kimberly-Clark ICON Automatic Roll Towel Dispenser? (Kimberly-Clark Icon Automatic Roll Towel Dispenser User Guide)

Answer

manuals.plus

Apr 10, 2025 - 07:14 AM


To replace the faceplate on the Kimberly-Clark ICON Automatic Roll Towel Dispenser, follow these steps:



1. Insert the key into the lock on the dispenser and rotate it a quarter turn to unlock the dispenser. Gently pull the cover forward.



2. The key can be removed at this point. The cover will automatically open, so do not force it.



3. If there are screws securing the faceplate to the dispenser cover, remove them and dispose of them properly.



4. Locate the locking features on the faceplate on the inside cover. Release the faceplate by lifting on the release lever (red) and pushing up on the push tab (blue). Brace the underside of the faceplate.



5. After the faceplate is released, remove it by taking it out from under the cover. Make sure to brace the underside of the faceplate so it doesn’t fall to the floor once released.



6. Close the cover completely and make sure it locks shut.



7. Align the locking features (blue) on the new faceplate to the corresponding slots (red) on the dispenser front face. Push the new faceplate up against the dispenser, pressing firmly at the bottom corners. Ensure that the locking features are fully engaged into each slot and slide upwards until the faceplate locks into position.



Note: If you need additional faceplates, please contact your sales representative.



Please refer to the Kimberly-Clark ICON Automatic Roll Towel Dispenser User Guide for more detailed instructions and illustrations.