User Manual Q&AAnswer
Apr 10, 2025 - 07:09 AM
To install the LARK 83531 Flash Mount, follow these steps:
1. Find a clear area in which you can work and unpack the fixture and glass from the carton.
2. Review the instructions carefully before starting the assembly.
3. Start by removing the mounting plate (A) from (C) by removing the screws (E) located on the side of the backplate. Refer to Drawing 1 for reference.
4. Attach the mounting bracket (A) to the junction box (J) using two 8-32 screws (B) (not provided) or the screws from the previously installed mounting strap or plate.
5. Make all wiring connections following the instruction sheet (IS-18) provided. Ensure you read the wiring and grounding instructions (IS 18) and any additional directions for safety.
6. After making all electrical connections, push the wires into the junction box.
7. Slip the canopy (C) over the mounting strap (A) and align the holes in the canopy with the holes in the mounting strap. Thread in the screws (E) removed earlier to secure the fixture to the ceiling.
8. To install the glass (1), remove the threaded socket cover (2) and steel cover (3) from the socket (S) as shown in Drawing 2.
9. Slip the glass (1) over the socket and hold it in position.
10. Thread the socket cover (2) and steel cover (3) onto the socket and tighten until snug to secure the glass.
Please note that if new wiring is required, it is recommended to consult a qualified electrician or local authorities for code requirements.
For more detailed instructions and safety information, refer to the LARK 83531 Flash Mount Instruction Manual.
Add New Comment