How do I assemble the KAYOBA Snooker Table Mini? (KAYOBA Snooker Table Mini User Manual)

Answer

manuals.plus

Apr 10, 2025 - 06:58 AM


To assemble the KAYOBA 021090 Snooker Table Mini, you will need the following tools: 

1. Screwdriver
2. Allen wrench (included in the package)
3. Hammer (optional, for tapping in the screws)

Here are the steps to assemble the snooker table:

1. Lay out all the parts and hardware included in the package.
2. Start by attaching the legs to the main frame of the table. Use the screws and the Allen wrench to secure them in place. Make sure the legs are evenly spaced and tightened securely.
3. Once the legs are attached, flip the table over to its upright position.
4. Place the playing surface on top of the frame, aligning the  xxxx  holes on the surface with the holes on the frame.
5. Insert the screws through the holes and use the Allen wrench to tighten them. Ensure that the playing surface is securely fastened to the frame.
6. Attach the pockets to the sides of the table. The pockets may come with pre-drilled holes for easy installation. Use the screws and the screwdriver to secure the pockets in place.
7. Once all the components are securely attached, double-check all the screws and connections to ensure everything is tight and stable.
8. Your KAYOBA 021090 Snooker Table Mini is now ready to be used.

Please note that this is a general guide for assembly, and it is always recommended to refer to the user manual provided by the manufacturer for specific instructions and diagrams.