User Manual Q&AAnswer
Apr 10, 2025 - 06:54 AM
To set the desired temperature on the petnanny HG-969 Hygger Digital Temp Controller, follow these steps:
1. Plug the heater into power and the IC temperature controller will display the current water temperature and the preset temperature.
2. Press the "SET" button ( ) on the controller. The digital temperature will flash three times on the display.
3. Press the " " button repeatedly until you reach your desired temperature value. The display will flash the desired temperature value three times before returning to the current tank temperature.
4. Your heater is now set to the desired temperature. The temperature range you can set is 68℉ to 93℉.
Please note that the instructions provided here are a summary and it is recommended to refer to the user manual for more detailed instructions and troubleshooting information.
Add New Comment