User Manual Q&AAnswer
Apr 10, 2025 - 06:52 AM
To install the TRIO 641412107 Recessed Ceiling Light Bullet 21x1,5W, please follow the steps below:
1. Turn off the power: Before starting the installation, make sure to turn off the power supply to the area where you will be installing the light.
2. Prepare the mounting hole: Measure and mark the desired location for the light on the ceiling. Use a suitable hole saw or cutter to create a hole with the specified diameter according to the product specifications.
3. Connect the wiring: Carefully connect the electrical wires from the light fixture to the corresponding wires in the ceiling. Follow the color-coded instructions in the manual to ensure proper connections. It is recommended to use wire connectors to secure the connections.
4. Secure the light fixture: Insert the light fixture into the mounting hole and align it properly. Use the included mounting clips or screws to secure the fixture to the ceiling. Make sure it is firmly attached and flush with the ceiling surface.
5. Test the installation: Once the light fixture is securely installed, turn on the power supply and test the light to ensure it is functioning correctly. If the light does not turn on or there are any issues, double-check the wiring connections and consult a professional if needed.
Please note that the above instructions are a general guideline. It is always recommended to refer to the specific user manual provided with the product for detailed and accurate installation instructions.
Add New Comment