How do I install and set up the UBIQUITI LBEAX LiteBeam Wireless Bridge? (Ubiquiti LBEAX LiteBeam Wireless Bridge Instruction Manual)

Answer

manuals.plus

Apr 10, 2025 - 06:45 AM


To install and set up the UBIQUITI LBEAX LiteBeam Wireless Bridge, please follow the instructions provided in the manual. Here is a step-by-step guide:

1. Mounting the Device:
   - Choose a suitable location for mounting the LiteBeam device, ensuring it has a clear line of sight to the other device it will be connecting to.
   - Attach the mounting bracket to the device using the provided screws.
   - Securely mount the device on a pole or other suitable structure using the mounting bracket.

2. Connecting the Cables:
   - Connect the Ethernet cable from the Ethernet port on the LiteBeam device to your network device (e.g., router, switch).
   - Connect the provided PoE (Power over Ethernet) adapter to the LiteBeam device's PoE port.
   - Connect the other end of the PoE adapter to a power source.

3. Aligning the Antenna:
   - Use the alignment tool provided in the package to adjust the LiteBeam's antenna for optimal signal strength.
   - Aim the antenna towards the other device or access point you want to connect to.

4. Powering On the Device:
   - Once all the connections are made, power on the LiteBeam device by plugging in the PoE adapter.
   - The device will start booting up, and the LED indicators will show the status of the device.

5. Configuring the Device:
   - Access the device's graphical user interface (GUI) by entering the device's IP address in a web browser.
   - Log in using the default username and password (provided in the manual).
   - Follow the on-screen instructions to configure the device according to your network requirements.

For more detailed information and troubleshooting, please refer to the UBIQUITI LBEAX LiteBeam Wireless Bridge Instruction Manual.