User Manual Q&AAnswer
Apr 10, 2025 - 06:12 AM
To change the combination code on the BLANCC BIS794 Electronic Safe with Combination Lock, follow these steps:
1. Open the safe door.
2. Press the red button "X" located behind the door. The yellow light will come on and give a short beep.
3. Within 30 seconds, press 3 to 8 numbers that you wish to use as the new combination.
4. Confirm the new combination by pressing the letter "E" within 30 seconds. If you fail to do so, you will need to restart from step 2.
5. Write down your new combination immediately and check whether it has been programmed by keeping the safe door open.
Please refer to the user manual for further instructions and diagrams.
Note: Each number pressed will make the yellow light flash with a short beep, indicating that the microprocessor confirmed it. If the yellow light keeps flashing with the beep, it means the code is wrong.
Add New Comment