User Manual Q&AAnswer
Apr 10, 2025 - 05:53 AM
To install the ZALMAN CNPS80G CPU Cooler on your Intel LGA1700/1200/115X CPU, please follow the steps below:
1. Before installation, make sure to check the components list and condition of the product. If any problem is found, contact the retailer for a replacement.
2. Ensure that your computer is turned off and unplugged from the power source.
3. Remove any existing CPU cooler from your CPU socket.
4. Apply a small amount of thermal grease onto the center of the CPU surface. Be careful not to apply too much grease.
5. Place the ZALMAN CNPS80G CPU Cooler onto the CPU surface, aligning the mounting holes on the cooler with the corresponding holes on the CPU socket.
6. Secure the cooler in place by using the provided mounting brackets and screws. Make sure to tighten the screws evenly to ensure proper contact between the cooler and the CPU.
7. Connect the 4-pin connector from the CPU cooler to the CPU fan header on your motherboard.
8. Double-check all connections and ensure that the cooler is securely installed.
9. Close the computer case and reconnect the power source.
10. Power on your computer and check the CPU temperature and fan speed in your system's BIOS or monitoring software to ensure proper operation.
Please note that these instructions are a general guideline, and it is always recommended to refer to the user manual provided with the product for detailed and specific installation instructions.
Add New Comment