User Manual Q&AAnswer
Apr 10, 2025 - 05:40 AM
To install the Hama 00201521 Multi Uni Smartphone Holder Set in your car, follow these steps:
1. Before installing the bracket, check the installation options in your vehicle. If you are unsure, refer to your vehicle's instruction manual or contact the vehicle manufacturer for guidance.
2. Choose between the grating holder and the suction cup holder, depending on your preference and the available mounting surfaces in your car.
3. Grating Holder:
- Slide the grating clamp carefully onto the open slats of the grating until it engages.
- To remove it, carefully pull the holder out of the grating.
4. Suction Cup Holder:
- Remove the protective film from the suction cup.
- Open the locking lever on the suction cup.
- Position the holder with the suction cup on a clean, even mounting surface (e.g., windscreen).
- Lightly press the holder onto the required installation surface and close the locking lever to secure the holder in place.
- After installation, always check that the suction cup is secure.
- To release the suction cup from the installation surface, open the locking lever. If necessary, pull gently on the tab to completely release the suction cup.
5. Mounting the Universal Bracket:
- Attach the universal bracket using the locking lug on the holder (suction cup holder, grating clamp).
- Press the button on the side of the universal bracket to open the holding jaws.
- Insert your desired device and fix it in place by gently pressing the holding jaws together.
- To remove the device easily, press the button on the side of the universal bracket.
Note: Always remove your device from the bracket before attaching or removing it from the holder (suction cup holder, grating clamp).
Please refer to the provided user manual for additional information, safety instructions, and care and maintenance guidelines.
Add New Comment