User Manual Q&AAnswer
Apr 10, 2025 - 05:35 AM
To install the SAFATEX Titan Atex AC + 24V Pendant Floodlight, follow these steps:
1. Choose the appropriate installation method based on your requirements (pendant mount, ceiling mount, pipe mount, or stanchion mount).
2. Install the M10 expansion anchor bolts correctly according to the chosen installation method.
3. Fix the brackets to the appropriate places on the light fitting.
4. Use flat washers, lock washers, and bolt nuts to secure the light fitting to the expansion anchor bolts.
5. If using the magnet bracket, use an M6 inner hexagon xxxx to install the magnet accessories on the lamp.
6. Select a suitable input cable with the correct stripping length (L: 60mm, N: 60mm, GND: 60mm).
7. Open the side cover of the light fitting.
8. Remove the cable gland, loosen the screws, and wire clips.
9. Pass the cable through the cable gland to the terminal box, do the wiring, and fasten the cable gland.
10. Fix the side cover back in place.
11. Ensure external grounding is properly installed.
12. Install the safety chain to the installation surface.
13. Refer to the luminaire wiring diagram for proper connections.
For more detailed installation instructions and diagrams, please refer to the SAFATEX Titan Atex AC + 24V Pendant Floodlight User Manual.
Add New Comment